1,Solar rechargeable energy for LED lighting,Green and
environmentally and power saving .
2.Auto charge in day time and auto lighting in the night.
3.Easy install and widely use.
4.Turn the switch to "ON"position,And place the lamp under
sunshine for at least 3 to 4 hours before first time use.
(the power of lamp may run out during the long time transportation.)
5.To ensure that the product works well,every 3 mouths need to cleaning
the dust on the solar panels daylighting effect is better ,ensure the
solar panel charge the battery every day.
6.the service life of the product design ,the service life of the solar
Panels for 5 years , the night source for 5 years,Nickel-cadmium cell for
1.5 years ,the machine service life for five years.
This unit has intelligent light control switch antinomic control products
daily work,when the ray of light is more than 100LUX ,solar panels will
charge the battery ,and when the night falls or ray of light is lower
than 100-10LUX,this lamp will automatic light ,no need human operate any more .
1. Turn the switch to "ON" Position ,the switch is located at he bottom base of
solar panel ,charge the solar product by it under direct sunshine for at least
2. The light will work automatically once the switch is in "ON" position ,It will
automatically charge under direct sunshine in the day time and illuminate at night.
Note: in order to verify that the knob is correctly switched to "ON" ,cover the solar
panel with your hand and the light will turn "ON" automatically.
Two way product installation:
1.first elected perfect installation position ,insert the alum bracket into gap in the lamp
with 3*8 screws to fix the backet in to lamp ,and with M5*30mm thumb screws to secure fix
the bracket in the gutter.
2.first select a perfect installation position ,insert the alum bracket into gab in the gab
in the lamp use 3*8 screws screw to fix the bracket and lamp .3*25mm expansion particles
screws to fix the bracket on gutter.
1 X Solar Light
1 X Mounting Bracket
6 X Screws
1 X Manual